08-31-2009 08:44 PM - edited 03-11-2019 09:11 AM
I have an ASA 5520 on which I've enabled EIGRP. There are two routers to which it is a neighbor and these have equal cost distance to a network across the network. The network will automatically load-balance but the default is on a per destination basis. I would like to have it load balance on a per packet basis as we have one large load to the same destination. On the router IOS v12.4 there is a way to change this on a per interface basis (ip load-balance per-packet) but I haven't found the equivalent command in the ASA sw v 8.0(3). Does anyone know if there is such a command or another way to achieve this? Thanks.
09-04-2009 07:59 AM
Per-packet load balancing uses round-robin techniques to select the output path without basing the choice on the packet content.
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/pplb.html#wp1038067
09-04-2009 06:59 PM
Yes, and it works great on a cisco router running v12. I'm trying to find the same command (or equivalent) on an ASA appliance running 8.0(3).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide