×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

TCL Command "leg senddigit"

Unanswered Question
Sep 1st, 2009
User Badges:

Do the called party hear a DTMF tone, when we use "leg senddigit leg_outgoing" command at TCL Script application?


I have tried it out, unfortunately the called party did not hear any DTMF tone? Did the Router require special files to play the DTMF tone?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Tue, 09/01/2009 - 03:10
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Are you using this on a pots or voip call leg ?

wahyukurnia Tue, 09/01/2009 - 07:02
User Badges:

I am using the script tcl on voip call leg and the final destination is on pots call leg. The calling party is from IP Phone of CME or CM.


I will use this script for sending digit DTMF after got second tone from VOIP Service Provider.


Is it possible using "leg senddigit" for voip call leg?

paolo bevilacqua Tue, 09/01/2009 - 07:29
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

According to the documentation, it is not possible. You can try playing a file with the digit recordered.


wahyukurnia Tue, 09/01/2009 - 07:38
User Badges:

I have tried it out using prerecorded dtmf as *.au that stored at flash. This tone generated by http://www.dialabc.com/sound/generate/. Unfortunately VOIP Srv Provider could not recognize the digit. Do you have recommendation tool that produce standard DTMF tone?

Actions

This Discussion