TCL Command "leg senddigit"

wahyukurnia · ‎09-01-2009

Do the called party hear a DTMF tone, when we use "leg senddigit leg_outgoing" command at TCL Script application?

I have tried it out, unfortunately the called party did not hear any DTMF tone? Did the Router require special files to play the DTMF tone?

paolo bevilacqua · ‎09-01-2009

Are you using this on a pots or voip call leg ?

wahyukurnia · ‎09-01-2009

I am using the script tcl on voip call leg and the final destination is on pots call leg. The calling party is from IP Phone of CME or CM.

I will use this script for sending digit DTMF after got second tone from VOIP Service Provider.

Is it possible using "leg senddigit" for voip call leg?

paolo bevilacqua · ‎09-01-2009

According to the documentation, it is not possible. You can try playing a file with the digit recordered.

wahyukurnia · ‎09-01-2009

I have tried it out using prerecorded dtmf as *.au that stored at flash. This tone generated by http://www.dialabc.com/sound/generate/. Unfortunately VOIP Srv Provider could not recognize the digit. Do you have recommendation tool that produce standard DTMF tone?

paolo bevilacqua · ‎09-01-2009

You can record your own directly in router format:

http://pbevila.fastmail.fm/public/Recorder/

Please remember to rate useful posts with the scrollbox below.