Question about voice-port and translation-profile configured on it. ISDNPRI

Unanswered Question
Sep 1st, 2009

I have voice gateways that works like MGCP.

I also configured them for SRST and voice-ports configured with voice tranlation profiles that will work as H323 gatway in fallback mode.

Sometimes configuration of translation-profiles disappear from voice-port.

the problem is that when I have secondary problem with voice gateway (translation-profiles were been disappeared from voice-port.) and I hadn't configured translation-profiles, voice gateway will not be work.

So the problem is that I should control all voice-ports in all gateways to have command translation-profile.

How I can automate this, i think,issue?

Thank you

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jaime Valencia Tue, 09/01/2009 - 06:13

You probably have this commands:

ccm-manager config server x.x.x.x

ccm-manager config

remove them



if this helps, please rate


This Discussion