Another Syslog Problem

Unanswered Question
Sep 1st, 2009
User Badges:

I have recently installed Cisco C-Class enclosures with Cisco 3120 switches in them.

I'm getting tons of interface up/down syslog messages and I'm not able to stop them:

Sep 1 12:49:58.402: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/3, changed state to down

I did the following:

1. I enabled the message filter in syslog set to drop the up/down syslog

2. I turned off interface logging by using the interface command "no logging event link-status"


Now if I do show log in the switch I don't see any messages on the console but message to my syslog_info file are constantly

growing and also appear in the syslog 24 hour and standard report. How do I stop these messages from seeing in syslog?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 09/01/2009 - 09:29
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Post the full config from this switch as well as a screenshot of the RME Syslog Message Filters screen.

Joe Clarke Tue, 09/01/2009 - 09:49
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Set Include interfaces of selected devices to Yes, and the filter should be effective. As for why the messages are still being sent, I cannot say. The config appears to be correct.

Actions

This Discussion