09-01-2009 09:11 AM
I have recently installed Cisco C-Class enclosures with Cisco 3120 switches in them.
I'm getting tons of interface up/down syslog messages and I'm not able to stop them:
Sep 1 12:49:58.402: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/3, changed state to down
I did the following:
1. I enabled the message filter in syslog set to drop the up/down syslog
2. I turned off interface logging by using the interface command "no logging event link-status"
Now if I do show log in the switch I don't see any messages on the console but message to my syslog_info file are constantly
growing and also appear in the syslog 24 hour and standard report. How do I stop these messages from seeing in syslog?
09-01-2009 09:29 AM
Post the full config from this switch as well as a screenshot of the RME Syslog Message Filters screen.
09-01-2009 09:43 AM
09-01-2009 09:49 AM
Set Include interfaces of selected devices to Yes, and the filter should be effective. As for why the messages are still being sent, I cannot say. The config appears to be correct.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide