Fax to DID problem (over PRI)

Unanswered Question
Sep 1st, 2009

From what I can tell... I have the right configurations in there.. maybe I'm missing something but I can't get it to work.

Here is the config..

fax receive called-subscriber $d$

fax interface-type fax-mail

mta send server 192.168.188.10 port 25

mta send subject Fax message

mta send with-subject both

mta send postmaster [email protected]

mta send mail-from hostname UC520

mta send mail-from username $s$!

application  service fax_detect flash:app_fax_detect.2.1.2.2.tcl

  param fax-dtmf 2

  param mode listen-first

  param voice-dtmf 1

!!

dial-peer voice 300 mmoip

  service fax_on_vfc_onramp_app out-bound

  destination-pattern .

  information-type fax

  session target mailto:[email protected]

When I perform "debug mmoip send email [email protected]" this is the SMTP log that it generates (UC520's IP is .50 - notice there is no DATA being relayed to the destination SMTP server).  I never get this debug email in the mailbox.

16:08:44 192.168.188.50 EHLO - 250

16:08:44 192.168.188.50 MAIL - 250

16:08:45 192.168.188.50 RCPT - 250

16:08:45 192.168.188.50 DATA - 250

16:08:46 192.168.188.50 QUIT - 240

16:08:48 1.2.254.253 - - 0

16:08:48 1.2.254.253 EHLO - 0

16:08:48 1.2.254.253 - - 0

16:08:48 1.2.254.253 MAIL - 0

16:08:48 1.2.254.253 - - 0

16:08:48 1.2.254.253 QUIT - 0

16:08:48 1.2.254.253 - - 0              

Does anyone know why this is happening?              

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pro4ianyc Wed, 09/02/2009 - 06:12

figured out the problem...

had to change this line

mta send mail-from hostname UC520

to

mta send mail-from hostname emaildomain.com

and it started working.

thanks

Actions

This Discussion