CCM 7.x and audio conferencing

Unanswered Question
Sep 2nd, 2009
User Badges:

Hii, what is the max number of participants supported by CCM 7.1 ou 7.0 for audio conferencing, and how can increase the number of participants (15 for exple)..Thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Wed, 09/02/2009 - 05:21
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Abderrahim,


To set the Maximum AdHoc/MeetMe Conference Participants.


MaxAdHocConference


Default: 4


Min: 3


Max: maximum size of largest conference bridge in system


Specifies the maximum number of parties that can be added to a Unicast Ad-Hoc conference.



Both Ad Hoc and MeetMe conferences have a configurable setting that limits the number of participants (Software Conference Bridge);


Clusterwide Parameters (Service)


Maximum Ad Hoc Conference = 4


Maximum MeetMe Conference Unicast = 16



The default number of Maximum MeetMe Participants (per Conference) is set at 4.


To increase the Maximum number of MeetMe participants (we have ours at 16);


Go to:


Service Parameters Configuration >Clusterwide Parameters (Service)>Maximum MeetMe Conference



Hope this helps!

Rob


dzrahimbmb Wed, 09/02/2009 - 05:26
User Badges:

OK, so we can have a conference with 16 particpants and the CCM support that without addind DSP ? Many Thanks

Rob Huffman Wed, 09/02/2009 - 05:40
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Abderrahim,


You are most welcome my friend!


Cheers!

Rob

Actions

This Discussion