We are configuring ace module for load balancing of two real servers in bridged mode. The real servers are actually virtual machines. Before loadbalancing configuration the physical server was connected to MSFC with actual vlan 47. the virtual servers having IP add of vlan 47 subnet. As we are configuring the ace in bridged mode so the client facing & server facing vlan will be different & it is bridged in the ace. But the problem is all the virtual server in the physical machine are not going to be load balanced. For this what the server team did is they provided one additional SEA(shared etherchannel adapter) in the physical server & connected directly to the MSFC. We assigned that interfaces with the bridged vlan. After doing this the following problems we faced:
1. the real server was not reachable
2. once the interfaces are put back in the actual vlan it became reachable.
3. The VIP is operational but all the connections are getting dropped.
4. Though the real servers are reachable with the ports configured in ace but the VIP still we are unable to access by the VIP.
Can anybody give us some solution on this issue. If any clarification required pls let me know.
Thanks in advance