Internaltional dial peer isdn call type "International"

Unanswered Question
Sep 3rd, 2009
User Badges:

Hi. I am having an issue on a PRI so that with a dialpeer when i send 011 followed by the number it is being flaged as isdn type international and telco is dumping the call. if i dont prefix the 011 is is flagged as unknown which is also being dumped

I need to flag the call ISDN type as unknown when i prefix with 011. I cant figure out how to do this

dial-peer voice 3 pots

numbering-type unknown

destination-pattern 9011T

port 0/0/0:23

prefix 011


debug output

Bearer Capability i = 0x8090A2

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98397

Exclusive, Channel 23

Calling Party Number i = 0x2181, '3123245277'

Plan:ISDN, Type:National

Called Party Number i = 0x91, '011441865314280'

Plan:ISDN, Type:International

*Sep 4 00:06:57.287: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x810C


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
kking2008 Fri, 09/04/2009 - 07:34
User Badges:

Heres how I do it.

!

!

voice translation-rule 2

rule 2 /\(011*\)/ /\1/ type any unknown

!

voice translation-profile intunk

translate called 2

!

dial-peer voice 3 pots

translation-profile outgoing intunk

destination-pattern 9011T

port 0/0/0:23

prefix 011


Kenneth Mohammed Fri, 09/04/2009 - 09:13
User Badges:
  • Silver, 250 points or more

Hello,


I had this same issue with a customer yesterday. Under the D-channel interface enter the following:


interface Serialx/x/x:23

isdn map address ^011 plan unknown type unknown


Hope that helped, if so please rate.

gsidhu Sat, 02/26/2011 - 04:47
User Badges:

nice one Kenneth - 5 points from me

jmeier10510 Fri, 09/04/2015 - 03:37
User Badges:

I have a question about this.

Disregard....I figured it out.  removed my question

 

Actions

This Discussion