Please could you help.I need to mix up traffic shaping for both tcp protocols and ip protocols.My scenario is:
I have got a router that does traffic shaping using CBWFQ. find my configs attached.shaping is ok.All the 3 clients are dsl clients and they have a network behind the given ip addresses.The problem is, if one pc from a client eg 192.168.1.200 is downloading a file from the internet, everyone under that network cannot browse.Thus means all bandwidth will be used up for the file downloads.Web and ftp traffic will be affected for that network in particular.can i reserve bandwidth for www and ftp and how can i do it with my current configs.I tried adding this to my config but its not working
match protocol http
match protocol ftp
match protocol secure-http
shape average 128000
Just to let you know what I looking for in advance. Possible causes I think might be:
1) You need to configure 'ip nbar protocol-discovery' under your interface that you have the qos on. This command is required for NBAR to work in older releases.
2) Class maps in a policy statement are read in the order they are configured, so if the web traffic you are trying to limit is already matched by a previous class map then your new class map will never be used. To fix this you will have to reconfigure your policy so the web class is at the top.