CME - Conferencing Problem

Unanswered Question
Sep 4th, 2009
User Badges:

Hi,

I have CME 7.1


Is it a must that for more than two party conf. call I should create OCtal Dn, I created dual-line DN, and the call gets dropped if I want to involve the third party.


thanks


Thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gogasca Sat, 09/05/2009 - 01:32
User Badges:
  • Green, 3000 points or more

I wanted to share this link with you:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/

guide/cmeconf.html

Make sure dedicated DSPs available to do hardware conferencing, or

software conferencing are set up either. (If you had intended to do

software conferencing, that link will be helpful).

Phone conferences will only work with dual (or octal) line ephone-dns.


Actions

This Discussion