09-06-2009 02:30 AM - edited 03-15-2019 07:39 PM
We are using CCM 6.1, in that BLF is not working.
The following config are done as below:
1) Enable the BLF in Enterprise parameter
2) Clusterwide Sercvice Paramater for Presence group
3) Apply presence group to the directory number.
4) Cuastomize phone button template for the BLF speed dial
5)Configure BLF/Speed dial button fo rthe phones device profiles
6) Add a presence group to the Dn
When I follows the abovwe steps, the device showa BLF speed dial as ordianry speed dial. any suggestion please let know.
09-06-2009 04:49 AM
Your configuration fine. Kindly do these 2 steps & let me know..I aso have 6.1 & it's working fine.
Under Protocol Specific Configuration (on the Phone):
1. Presence Group*---> Select the bew Presence Group that you created.
2. Subscribe CSS--> Selcet the CSS on which IP phone is residing.
09-06-2009 04:59 AM
Yes I have updated the two parameter and reset and reboot the CCM also, but the BLF/SD shows like normal speed dial.
Please light me what I am missing in this config.
12-06-2016 10:55 AM
Try this...
In callmanager goto the Phone Configuration page and scroll down to the box called Protocol Specific Information. In that box is a field called SUBSCRIBE Calling Search Space. That field needs to be populated with an internal network calling search space. This will enable the indicator lights for your BLF entries. I hope this helps. Have a Great Day!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide