cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
465
Views
0
Helpful
2
Replies

Restrict Access Vlan with WLC 4402

danielnunes
Level 1
Level 1

Folks, I have three SSID configured on WLC and three groups configured on ACS and I need to restrict SSID access based on ACS group.

I tried to use this guide below.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml

How you can see, this example is aplicable to 802.1x and work out fine with 2 SSIDs that I have but the third SSID don't work because it use the NAC Web login to Auth the user, I needed to fallback because this configuration blocked my NAC Authentication.

Although I have configured NAR just Group2 and Group3, users on Group1 that are Auth with NAC were blocked.

Anyone Know Why this or How can i configure this restriction on WLC and ACS?

thanks a lot

2 Replies 2

Erick Delgado
Level 1
Level 1

Hi,

You could be hitting DDTS CSCdu52690.

I will suggest to do an upgrade ACS version 3.0 is old and unsupported.

Thanks,

Please dismiss previous message.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: