Solved: Nexus 7K SNMP V3 User

molinek · ‎09-06-2009

Anyone now how to setup a snmp v3 user? Trying to use Solarwinds products and never can authenticate. Tried several ways. Would be great is someone uses Nexus and Solarwinds out there.

Thanks

Lucien Avramov · ‎09-08-2009

What version of NEX-OS do you have?

View solution in original post

Collin Clark · ‎09-09-2009

I looked at the Nexus config guide for SNMPv3 and looks just like IOS. Check the link below, usually there is a mis-config in NCM.

https://packetpros.com/netmon/SNMPv3_Orion.html

Hope it helps.

View solution in original post

Lucien Avramov · ‎09-08-2009

What version of NEX-OS do you have?

Collin Clark · ‎09-09-2009

I looked at the Nexus config guide for SNMPv3 and looks just like IOS. Check the link below, usually there is a mis-config in NCM.

https://packetpros.com/netmon/SNMPv3_Orion.html

Hope it helps.

molinek · ‎09-09-2009

Thanks for the link but NX0S doesn't have that view command. I'm going to try solarwinds support and see if they have anyting.

Roman Oseledko · ‎08-05-2012

Take a look the SNMP privacy(encryption) settings. They have to be enabled globally.

I believe that by default, it's Auth only, not AuthPriv.

But also be careful, because NXOS creates a AAA user when you create an SNMPv3 user.