Connect ATA to Modem GSM

Answered Question
Sep 7th, 2009
User Badges:

Hi,


I have a question with ATA devices. Is possible connect serial ATA to modem GSM to make mobile call?

Correct Answer by Jaime Valencia about 7 years 8 months ago

User is unable to connect ATA to modem

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K70834082


Connecting a modem to the ATA is an unsupported hardware configuration and can have undesirable results. The ATA 18x is not designed to work with either PBX or KSU, or any other device except, plain old telephones because it does not provide Sup Disc parameters and it is expecting the end-device (an analog phone) to be hung up manually.


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Mon, 09/07/2009 - 06:36
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

User is unable to connect ATA to modem

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K70834082


Connecting a modem to the ATA is an unsupported hardware configuration and can have undesirable results. The ATA 18x is not designed to work with either PBX or KSU, or any other device except, plain old telephones because it does not provide Sup Disc parameters and it is expecting the end-device (an analog phone) to be hung up manually.


HTH


java


if this helps, please rate

ma.romero Mon, 09/07/2009 - 06:57
User Badges:

Thanks for all.


This information have been so useful.


A greetings

Rob Huffman Mon, 09/07/2009 - 07:52
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Miguel,


Fax and Modem Connectivity


The Cisco VG 224, Cisco VG 204 and Cisco VG 202 support fax machines and modems. When using fax machines, they support Cisco fax relay, T.38 fax relay, and fax passthrough. Cisco or T.38 fax relay technologies allow transfer of faxes across the network with high reliability using less bandwidth than a voice call. All modems can be connected to the Cisco VG 224, Cisco VG 204 and Cisco VG 202 and will be transferred over the network using modem passthrough.


http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps2250/ps5516/product_data_sheet09186a00801d87f6.html



Hope this helps!

Rob


Actions

This Discussion