WLC LAP seconds

Unanswered Question
Sep 7th, 2009
User Badges:

I would like to do this:


For example, if the access points do not recive the Wireless LAn Controller response in 30 seconds, the access point will be registered in the secondary WLC. I would like to increase this number of seconds (in the example 30 seconds change to 50 seconds for exanple). How can I do?


Wireless Lan Controller : 4400

Version IOS : 5

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ricardorojas123 Mon, 09/07/2009 - 08:08
User Badges:

This parameter is called heartbeat. AP heartbeat is set to 30 seconds by default.



But How I can changed to 50 seconds for example ??



Leo Laohoo Mon, 09/07/2009 - 15:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

You can configure the fast heartbeat timer only for access points in local and hybrid-REAP modes.


Using the GUI to Configure Backup Controllers

http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51lwap.html#wp1334437


Hope this helps.


Please rate when applicable or helpful.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode