Unable to change default Numbering Plan on CUCM 7.0.2

Answered Question
Sep 7th, 2009
User Badges:

Dear All,



I am trying to change the default numbering plan from NANP to UKNP.


I have installed the locale file "cm-locale-en_GB-7.0.1.3000-1.cop.sgn"

twice from the below location from CCO and rebooted the server.


Voice and Unified Communications >

Cisco Unified Communications Manager Version 7.0 > Unified Communications Manager/CallManager Locale Installer>

7.(1.3000-1)



I still can not pick anything other then NANP under Route Pattern Configuration.


Is anyone aware of any known issues with this ?


Also, this is the NFR edition of the CUCM server. So, not sure if this is anything to do with it.



Many thanks in advance.



Regards,




Zahid


Correct Answer by Jaime Valencia about 7 years 7 months ago

You installed a locale (as the name clearly explains) NOT a dial plan.


Download the GB dial plan and install it, there is a section called Cisco International Dial Plan in downloads.


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Mon, 09/07/2009 - 18:04
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

You installed a locale (as the name clearly explains) NOT a dial plan.


Download the GB dial plan and install it, there is a section called Cisco International Dial Plan in downloads.


HTH


java


if this helps, please rate

lafirzaman Tue, 10/06/2009 - 07:54
User Badges:

you need to doanload dp-ffrxxxx.GB.cop.sgn from international dial plan and install it mate. what you've done is local this is GB english inteface for GUI and phone.

zahid.hassan Tue, 10/06/2009 - 09:07
User Badges:

Many thanks for this. Someone already pointed out mistake earlier.


Regards, Zahid

Actions

This Discussion