Inter VLAN Rotuing - Cisco Router and HP Procurve Switch

Unanswered Question
Sep 7th, 2009


I need pointers in using one of my Cisco router as an inter VLAN router routing between VLAN's on HP Procurve Switch. Any documentation would really help

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
utawakevou Mon, 09/07/2009 - 20:37

1760 is the current router employed at the remote site but i got a spare 1841 and a 2600

utawakevou Tue, 09/08/2009 - 12:44

Thanks for your reply. Link helps. Do you have any cisco documentation on inter vlan routing between Cisco and other brand switch - in my case Cisco and HP Procurve switches

utawakevou Wed, 11/11/2009 - 15:22

Finally figure this out. On the HP switch port where the router is connected I have to untagged the management VLAN and tagged the other VLAN's.

Thank you all

utawakevou Wed, 11/11/2009 - 15:28

For those who works with cisco and HP this is how I did it:

Here is what I did it:

Cisco Router


interface FastEthernet0/0

description MMGNT

ip address

ip helper-address

ip nbar protocol-discovery

ip route-cache flow

duplex auto

speed auto


interface FastEthernet0/0.1

description SRV-PRT-CLNT

encapsulation dot1Q 2

ip address


interface FastEthernet0/0.2

description VoIP

encapsulation dot1Q 3

ip address

ip helper-address

HP 2510 Switch


Running configuration:

; J9019A Configuration Editor; Created on release #Q.11.07

hostname "CETC-OFFICE"

interface 25

speed-duplex 1000-full


ip default-gateway

snmp-server community "public" Unrestricted

vlan 1

name "MMGNT"

untagged 24

ip address

tagged 25-26

no untagged 1-23


vlan 2


untagged 1-23

no ip address

tagged 24-26


vlan 3

name "VoIP"

no ip address

tagged 24-26



management-vlan 1


This Discussion