I have two 6500's with FWSM's. The 6500's have a VPN connection from each to a PIX for VPN between two sites.
The route out of the FWSM is the HSRP of the two 6500's so while both connections are up there's no problem. However, if one VPN connection goes down then although the other one is there it isn't used because the traffic is still sent to the other switch. The problem is that sometimes the VPN connection goes but the actual interface is still up.
Is there any way for me to get HSRP to track the VPN connection or a better way of doing things?