Trying to find the pcap file for a capture on an fwsm v4.0.6. I set up my capture like this:
access-list capacl permit ip 192.168.0.0 255.255.0.0 any
capture cap access-list capacl interface inside packet-length 1520 buffer 4000000
I can see my capture if I do a "show capture cap", but I'm trying to get at the pcap file.
I tried this, but it came back with a 404 error:
I'd be grateful for any help.
glad to hear.
Yes, in the command ref. for copy capture:
The following example shows how to copy a capture from within a context in multiple context mode. You must specify the context name:
hostname/Context1# capture abc access-list test interface inside
hostname/Context1# changeto system
hostname# copy capture:Context1/abc tftp:22.214.171.124/tftpboot/abc.cap
I will have the multiple context syntax added to the capture command reference
Example listed in the above link is only for single context.