No performance data for service module

Unanswered Question
Sep 9th, 2009

When issuing a 'show service-module s0/1' I never have any data in the performance counters. It's always (last 0 15 minute intervals).

WIC is a 4wire T1 with a 768IBR frame ckt.

Router is a 2600 series.

Is there a way to enabel this?

************************

Total Data (last 0 15 minute intervals):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

Data in current interval (0 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vmiller Wed, 09/09/2009 - 13:58

This is good news. A clean wan link.

Try show interface s0/1. thats where you will find some numbers.

jablizzard Wed, 09/09/2009 - 14:59

Actually, the T1 had taken many los, lof in past 2 hours when I took a snapshot of the Total Data info. The (last 0 15 minute interval) never changes. Always shows 0 15.

Actions

This Discussion