When issuing a 'show service-module s0/1' I never have any data in the performance counters. It's always (last 0 15 minute intervals).

WIC is a 4wire T1 with a 768IBR frame ckt.

Router is a 2600 series.

Is there a way to enabel this?

************************

Total Data (last 0 15 minute intervals):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

Data in current interval (0 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs