4006 CAM Filter a specific range of MAC's!

ernestogonzalez · ‎09-09-2009

Is there any way to filter a range of MAC's? Specifically as this way...i want to filter all the combinations of this MAC's 00008011-xx-xx!!!

Leo Laohoo · ‎09-09-2009

sh mac- address | include 0000.8011

ernestogonzalez · ‎09-09-2009

Tks, but in this case concern about CatOS and not for IOS and the objetive is to filter this MAC's like from the CAM, in other words the objetive is that the CAM (MAC add table) doesn`t accept this MAC's.......sorry i think that i don't formulate very well the question.

Thanks,

Ernesto

glen.grant · ‎09-09-2009

I think you would have to add the specific mac addresses and there is not a way to do a range.

"Console> (enable) set cam static filter 00-02-03-04-05-06 1 "

Leo Laohoo · ‎09-09-2009

You can try VLAN ACLs:

Configuration with VACL

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a0080883ca2.shtml#vacl_config