CME-7.01 - 7965G

Unanswered Question
Sep 9th, 2009
User Badges:

Hi,


I erased the config on a 7965G and could not get it upgraded on CME.


In telephony-service I specified load 7965G SCCP45.8-3-3S but i get a error message, the only thing i could do was load 7945G SCCP45.8-3-3S.


I do not see any SCCP65... files either in cme7.01 or cme 7.1


Then I tried using tftp-server flash:/ all the files specified below:


All these files exist in the flash.


From CCO:


Cisco Unified IP Phone 7945G and 7965G


SCCP45.8-3-3S.loads*

term45.default.loads

term65.default.loads

apps45.8-3-2-27.sbn

cnu45.8-3-2-27.sbn

cvm45sccp.8-3-2-27.sbn

dsp45.8-3-2-27.sbn

jar45sccp.8-3-2-27.sbn


Any help appreciated.


Thanks,

Paul

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
Paolo Bevilacqua Thu, 09/10/2009 - 04:03
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Configure load 7965 with .loads

Under telephony-service configure cnf-location to flash:/

You should then be able to upgrade.

Actions

This Discussion