802.11n

Unanswered Question
dancampb Thu, 09/10/2009 - 09:29

To get the MCS rates the WLAN has to either have no encryption or AES encryption. What encryption is your secured WLAN using? Also make sure WMM is enabled.

Robert.N.Barrett_2 Sun, 09/13/2009 - 07:50

From the little screen shot, your config looks good (assuming that's the config on your secure WLAN definition).

Are you sure you're connected to the 802.11n AP when you're dropping back to 802.11g speeds?

dennischolmes Wed, 09/16/2009 - 04:28

I suspect WMM as well Dan. Also make sure that the client device is for sure sending AES and not TKIP.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode