My issue is not resolved (2960g unsupported TCAM value size).

vainkopvalery · ‎09-10-2009

By some reason(forum has some technical problems?) I can't post to my original post, so I'll say it here:

My issue is not resolved. I still have:

!!! WARNING: The switch is not usable !!!

Reason:

Error unsupported TCAM value size

Actual value = 1, Expected value = 20

Tried many different images,still the same.

Do I have any hope except by RMA?!?!

John Blakley · ‎09-10-2009

Open a TAC case. Sounds like hardware failure.

HTH,

John

HTH, John *** Please rate all useful posts ***

basimba · ‎10-15-2011

I have come across a similiar issue with a 2960 switch which was loaded with IOS version c2960-lanbasek9-mz.122-25.SEE2.bin. I deleted that IOS and reloaded c2960-lanbasek9-mz.122-35.SE5.bin and that resolved the problem