cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6599
Views
15
Helpful
3
Replies

SIP INVITE with SDP (CUCM 7.1(2))

jevgep
Level 1
Level 1

Hi all,

Regarding Cisco docs:

Cisco Unified Communications Manager follows the procedures that are described in RFC 3261, 3262,

and 3264 to establish and clear down basic SIP calls. Often, on the outgoing side, Cisco Unified

Communications Manager will send out INVITE without SDP. This allows Cisco Unified

Communications Manager to discover the capabilities of both sides and provide media services in

between if necessary (for example, transcoding).

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/sip_msg/line_std/7_0_1/siplst70.pdf

Does it possible to configure CUCM to send INVITE with SDP ?

1 Accepted Solution

Accepted Solutions

Hi.

Go to "Trunk Configuration -> SIP Information" frame and change the value of "MTP Preferred Originating Codec" parameter.

WBR,

Dmytro

View solution in original post

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

Yes, check the MTP required in the SIP trunk

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Thank you now sip invites come out with sdp.

But how can I change default codec on CUCM from g.711 u-law to g.711 a-law ?

Hi.

Go to "Trunk Configuration -> SIP Information" frame and change the value of "MTP Preferred Originating Codec" parameter.

WBR,

Dmytro

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: