Jon Marshall Fri, 09/11/2009 - 01:46
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

David


int fa1

ip nat inside


int eth1

ip nat outside


ip nat inside source static 10.87.140.1 192.168.56.1


Jon

trombidz1 Fri, 09/11/2009 - 03:07
User Badges:

the return of show ip nat translation is:


Pro Inside global Inside local Outside local Outside global

--- 192.168.56.1 10.87.140.1 --- ---

--- 192.168.56.2 10.87.140.2 --- ---

--- 192.168.56.3 10.87.140.3 --- ---



If I understand well :


on the FA 1 int , all packets signed with the source 10.87.140.1 goes in the router and leave it with the new source 192.168.56.1 when they go to 192.153.133.101


on the Eth 1 int, all packets to the destination 192.168.56.1 goes in the router and leave it with the new destination 10.87.140.1


Correct ?


excuse my english


regards



Jon Marshall Fri, 09/11/2009 - 03:34
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

David


"on the FA 1 int , all packets signed with the source 10.87.140.1 goes in the router and leave it with the new source 192.168.56.1 when they go to 192.153.133.101"


Correct as long as the destination IP is out the eth1 interface which it is.


"on the Eth 1 int, all packets to the destination 192.168.56.1 goes in the router and leave it with the new destination 10.87.140.1"


Correct again as long as the destination is out the fa1 interface which it is.


Jon

Actions

This Discussion