LMS 2.6 RME Baseline Template doesn't work

Answered Question
Sep 11th, 2009
User Badges:

Hi all,


I am trying to create a configuration compliance template using LMS2.6/RME4.0.

Here is the template:


--------------------------------------------------------------

Name: Global SubMode: No isPrerequisite: No

Ordered : No Prerequisite-Commandset : none Parent: none


Name: AccessPortVlan10 SubMode: Yes isPrerequisite: Yes

Ordered : No Prerequisite-Commandset : none Parent: Global

interface [intname]

+ switchport access vlan 10

- switchport mode trunk


Name: StormControl SubMode: No isPrerequisite: No

Ordered : No Prerequisite-Commandset : AccessPortVlan10 Parent: AccessPortVlan10

interface [intname]

+ storm-control broadcast level 1.00

+ storm-control action trap

--------------------------------------------------------------


Access-Port in VLAN 10 should be configured with Storm-Control. Unfortunately it doesn't work at all, job result is "No Non-Compliant Commands" although the storm-control-commands are missing.

What am I doing wrong (apart from using an old CW-Version)?

Simple Templates (global mode without conditions) work fine.


Thanks in advance

Rolf

Correct Answer by Joe Clarke about 7 years 6 months ago

No, it won't work in RME 4.0. Support for this kind of checking was not added until RME 4.1. Even then, since you have a negative prereq, you will run into bug CSCsv25190. You wil need to upgrade to LMS 3.2 to have this kind of baseline work.


When you do, drop the submode on the child commandlet. The submode from the parent will be inherited.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
Joe Clarke Fri, 09/11/2009 - 08:44
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

No, it won't work in RME 4.0. Support for this kind of checking was not added until RME 4.1. Even then, since you have a negative prereq, you will run into bug CSCsv25190. You wil need to upgrade to LMS 3.2 to have this kind of baseline work.


When you do, drop the submode on the child commandlet. The submode from the parent will be inherited.

Actions

This Discussion