Hi, I'm hoping this is a relatively straight forward question for a routing expert but I'm falling over with OSPF at the moment! Essentially this is the config I have in a Nexus switch:
ip route 10.50.48.0/22 10.50.33.254
ip route 184.108.40.206/32 10.50.33.254
ip prefix-list static-advs seq 10 permit 10.50.48.0/22
ip prefix-list static-advs seq 20 permit 220.127.116.11/32
route-map static-to-ospf permit 10
match ip address prefix-list static-advs
router ospf 144
redistribute static route-map static-to-ospf
auto-cost reference-bandwidth 10000
Now if I go into one of the OSPF neighbours I can see the 18.104.22.168/32 route but the 10.50.48.0/22 route doesn't appear. Where is it going wrong? Does it have something to do with the summary-address line in the OSPF config?
Any help would be much appreciated!