LMS 3.1 IPM Alert sent to syslog

Unanswered Question
Sep 11th, 2009

We have LMS 3.1 installed and configure IPM threshold setting on rtt.Now it notifies violation to LMS server on IPM screen whenever there is any violation occur but at the same time i want my switch will send the same trap to my third party syslog server.Please let me know which are the additional command and additional required to do in switch?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Sat, 09/12/2009 - 08:53

Trap or syslog? If syslog, you need to enable:

ip sla logging traps

If SNMP traps, then you need to make sure you have ip sla (or rtr) traps enabled for your trap host:

snmp-server enable traps ipsla

snmp-server host traps public ipsla

digpal.zala Wed, 09/16/2009 - 21:04

Thanks jClarke

your advice resolve my issue.i want to enable traps on switch.now i will able to get ip sla traps on my syslog server.

thanks once again...


This Discussion