Workgroup bridge losing connection to AP & other issues

Unanswered Question
Sep 14th, 2009
User Badges:

Hi all

I am having issues where, if I try to connect to a device plugged into my ap, via the workgroup bridge connection, I cannot ping it, however If I jump on the access point and run a ping to the device plugged into it, it is ok, then this brings to life my ping from the lan.


I have also seen some funny things on the log, see below


Sep 10 00:59:37.610: %DOT11-4-UPLINK_ESTABLISHED: Interface Dot11Radio0, Associa

ted To AP Production_AP1 0016.9d44.8640 [None]

Sep 10 00:59:37.613: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

Sep 10 01:00:34.877: %DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: R

eceived deauthenticate (1) failure

Sep 10 01:00:34.877: %DOT11-4-MAXRETRIES: Packet to client 0016.9d44.8640 reache

d max retries, removing the client

Sep 10 01:00:34.882: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to dow

n

Sep 10 01:00:35.050: %DOT11-4-UPLINK_ESTABLISHED: Interface Dot11Radio0, Associa

ted To AP Production_AP1 0016.9d44.8640 [None]

Sep 10 01:00:35.053: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up


Any ideas ?


thanks


Carl

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode