Trouble with upgrade IOS on 7206vxr

Answered Question
Sep 14th, 2009
User Badges:
  • Silver, 250 points or more

I am not sure what I am doing wrong so hopefully someone will see my bonehead mistake.


Here is the issue:


MONEXTR01(boot)#copy tftp bootflash:

Address or name of remote host []? 10.1.1.240

Source filename []? c7200-adventerprisek9-mz.124-24.T1.bin

Destination filename [c7200-adventerprisek9-mz.124-24.T1.bin]?

Accessing tftp://10.1.1.240/c7200-adventerprisek9-mz.124-24.T1.bin...

%Warning: File not a valid executable for this system

Abort Copy? [confirm]


Here is the sh ver:

MONEXTR01(boot)#sh ver

Cisco IOS Software, 7200 Software (C7200P-KBOOT-M), Version 12.4(4)XD5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Tue 19-Dec-06 16:07 by alnguyen


ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)


MONEXTR01 uptime is 10 minutes

System returned to ROM by reload at 02:50:20 UTC Sat Feb 19 2000

System image file is "bootflash:c7200p-kboot-mz.124-4.XD5.bin"

Last reload reason: Reload Command



Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.

Processor board ID 26822998

MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2

6 slot VXR midplane, Version 2.6


Last reset from power-on


PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.

Current configuration on bus mb1 has a total of 100 bandwidth points.

This configuration is within the PCI bus capacity and is supported.


PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.

Current configuration on bus mb2 has a total of 0 bandwidth points.

This configuration is within the PCI bus capacity and is supported.


Please refer to the following document "Cisco 7200 Series Port Adaptor

Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>

for c7200 bandwidth points oversubscription and usage guidelines.



1 FastEthernet interface

3 Gigabit Ethernet interfaces

1 Serial interface

2045K bytes of NVRAM.


254464K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102


MONEXTR01(boot)#sh bootflash:

-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name

1 .. image D9C0D081 80F474 29 7926772 Jan 18 2000 23:50:41 +00:00 c7200p-kboot-mz.124-4.XD5.bin


57609100 bytes available (7926900 bytes used)


What am I missing?

Correct Answer by Jerry Ye about 7 years 9 months ago

You download the wrong image. You have a NPE-G2. The image name is c7200p-adventerprisek9-mz.124-24.T1.bin.


There is a p after the c7200.


HTH,

jerry

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Giuseppe Larosa Mon, 09/14/2009 - 08:02
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Rick,

the image could be for an older processor type notice that your current image has name:

c7200p-kboot-mz.124-4.XD5.bin


you need an image that starts with C7200p


see on one my c7200 with NPE-G2


sh ver | inc image

System image file is "disk2:c7200p-advsecurityk9-mz.124-20.T.bin"


sh ver | inc NPE

Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory.


hope to help

Giuseppe



Correct Answer
Jerry Ye Mon, 09/14/2009 - 08:03
User Badges:
  • Cisco Employee,

You download the wrong image. You have a NPE-G2. The image name is c7200p-adventerprisek9-mz.124-24.T1.bin.


There is a p after the c7200.


HTH,

jerry

Rick Morris Mon, 09/14/2009 - 08:54
User Badges:
  • Silver, 250 points or more

Thanks G and Jerry!


I found what I did wrong by your postings. When I downloaded the IOS I did not see under the links to choose which file you want another link for the NPE, kind of buried since my IE window was not full size. We will call this a Web-Design flaw since, IMHO, should be a direct link before you get to this point for the NPE.


Thanks again!


Rick

Actions

This Discussion