Hi, i'm using brand new 1 X SFE2000, 1 X RV082 as router and 2 X WAP2000 with linksys power injectors in my network. I would like to have 3 VLANs. first one would be a management vlan, second an admin vlan and the last one a customer vlan. management would be used for computer tech to manage the equipment. the admin Vlan would be used for all the employees, the AD win2k8 server will be on this vlan too. the customer vlan would be used only to get to the internet. VLan 1 would speak to 2 and 3, but 2 and 3 would not speak to each other. I will relay the AD DHCP server on the 3 vlan. The switch is on layer 3 protocol.
Here is my problem, as soon as i activate the IP access list, the switch is locking up and the only way i can get it to work is to go back to a previous saved config without IP access list activated. i'm activating IP access list with all access to any vlan...and still the same problem... MAC access list is working perfectly.
i'm having the latest firmware...
any advice would be welcome !
thanks alot !