09-15-2009 03:32 PM - edited 03-15-2019 07:45 PM
I configured three park-slots with the same number. IP Phones can park up-to three calls by pressing Park softkey. The problem is when you want to retrieve the parked calls you can retrieve only the first call that was parked. The other parked calls cannot be retrieved and when you dial 333 (park-slot extension) says "unknown number".
Below is my configuration.
ephone-dn 145
number 333 no-reg primary
park-slot timeout 30 limit 10
description park slot for Dealing
no huntstop
!
!
ephone-dn 146
number 333 no-reg primary
park-slot timeout 30 limit 10
description park slot for Dealing
preference 1
no huntstop
!
!
ephone-dn 147
number 333 no-reg primary
park-slot timeout 30 limit 10
description park slot for Dealing
preference 2
09-15-2009 08:41 PM
How would you know how to pick up the right call if they are all the same extension?
"I have a call for Bill on ext 333; I have a call for Jana on ext 333; I have a call for Greg on ext 333?"
Can you use 331, 332 and 333?
09-15-2009 11:35 PM
This number is programmed for sales department (3 extensions). All calls for the sales department can be answered and served by any user.
09-15-2009 11:44 PM
Verify both of these commands in
telephony-service to see if you get different results.
transfer-system full-consult to
transfer-system local-consult.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide