7507 GEIP+ VIP4-80 - Microcode Issue

Unanswered Question

HI,


Running into an issue trying to install a GEIP+ card into a 7507 running IOS 12.4(25) Service Provider, with RSP4's.


The following error is displayed:


{Sep 9 08:45:35.915 CDT: %DBUS-3-SW_NOTRDY: DBUS software not ready for slot 6 after DOWNLOAD, elapsed 24012, status 0x40 -Traceback= 0x404732E8 0x40686530 0x4068A9D8 0x40680B88 0x40680D40 0x40681438 0x40574124 0x40574108


Sep 9 08:45:35.915 CDT: %DBUS-3-WCSLDERR: Slot 6, error loading WCS, status 0x40 cmd/data 0x75 pos 6443142


Sep 9 08:45:35.915 CDT: %UCODE-3-LDFAIL: Unable to download ucode from system image in slot 6, trying rom ucode


Sep 9 08:45:35.919 CDT: %RSP-3-NOSTART: No microcode for VIP4-80 RM7000 card, slot 6


Sep 9 08:45:44.191 CDT: %RSP-3-ERROR: dbus read at 3E841182

}



HELP PLEASE....



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Wed, 09/16/2009 - 12:30
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Scott,

try to reseat the GEIP+ it may be not well placed in 7500 bus and all the other messages come from this.


if you have another empty slot I would try also in another slot.


Sometimes it is even possible to hung a C7500 when the insertion is not correct.


However, RSP4 supports GEIP+ we had two installed in C7507 chassis.

Performance are not very good.

Don't expect full rate capabilities



Hope to help

Giuseppe



Actions

This Discussion