paolo bevilacqua Wed, 09/16/2009 - 12:38
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hase you got the right time in the router ?

Have you reset telephones ?

mohamedessoufy Wed, 09/16/2009 - 12:42
User Badges:

Yes, i get time-zon 23 (West Europe), i see that the time-zone is well configured on 23 with the show telephony-service command.


i reset phones too.

paolo bevilacqua Wed, 09/16/2009 - 12:47
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You need right time in the router, "show clock". Using an NYP server is the preferred form.

mohamedessoufy Wed, 09/16/2009 - 12:50
User Badges:

with "show clock" i have the correct time in the router, ntp server is configured too.

Adrian Saavedra Wed, 09/16/2009 - 13:01
User Badges:
  • Gold, 750 points or more

Hi,


If correct time is in the router and time-zone under telephony service, then you can try:


telephony-service

create cnf-files


Then reset the phones.


Hope it helps, if it does please rate.

Best regards,


- Adrián.


mohamedessoufy Wed, 09/16/2009 - 13:04
User Badges:

I tried that too but don't resolve the problem.


thanks for your help

paolo bevilacqua Wed, 09/16/2009 - 14:51
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Have you set right type under ephone ?

paolo bevilacqua Thu, 09/17/2009 - 01:03
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

23 in telephony-service.

Have you checked router have the right time in first place ?

mohamedessoufy Thu, 09/17/2009 - 01:35
User Badges:

23 that's the value i enter.

yes the router has the right time and ntp server configured too.

paolo bevilacqua Thu, 09/17/2009 - 01:47
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Which telephone do you have and which firmware ?

paolo bevilacqua Thu, 09/17/2009 - 02:09
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Try upgrading to 8.4(4)

mohamedessoufy Thu, 09/17/2009 - 05:29
User Badges:

I reloaded the router and that's work fine now, thanks for your assistance

ISIDOROS ANTONIOU Fri, 07/19/2013 - 04:02
User Badges:

Hi to all,

I have read all your helpful notes. I need your help on the this problem.

The CME has the below configuration:


///

clock timezone EET 2

clock summer-time EEST recurring last Sun Mar 3:00 last Sun Oct 4:00

network-clock-participate wic 0

network-clock-participate wic 1

network-clock-participate wic 2

///


///

telephony-service

time-zone 29

time-format 24

date-format dd-mm-yy

///


All the IP-Phones 6941 has the correct time but unfortunately all the 79xx IP-Phones have wrong time (missing one hour).


Could you please help me on this?

tnx a lot

Isidoros

Actions

This Discussion