09-16-2009 12:37 PM - edited 03-15-2019 07:46 PM
Hello,
I install a CME 7.0 change the time-zone in Telephony-service to 23 but still have the time of USA, can you tell me what's the can be the problem plz ?
Regards
09-16-2009 12:38 PM
Hase you got the right time in the router ?
Have you reset telephones ?
09-16-2009 12:42 PM
Yes, i get time-zon 23 (West Europe), i see that the time-zone is well configured on 23 with the show telephony-service command.
i reset phones too.
09-16-2009 12:47 PM
You need right time in the router, "show clock". Using an NYP server is the preferred form.
09-16-2009 12:50 PM
with "show clock" i have the correct time in the router, ntp server is configured too.
09-16-2009 01:01 PM
Hi,
If correct time is in the router and time-zone under telephony service, then you can try:
telephony-service
create cnf-files
Then reset the phones.
Hope it helps, if it does please rate.
Best regards,
- Adrián.
09-16-2009 01:04 PM
I tried that too but don't resolve the problem.
thanks for your help
09-16-2009 01:25 PM
do you have another idea plz to resolve this problem ?
09-16-2009 02:51 PM
Have you set right type under ephone ?
09-16-2009 11:36 PM
yes it's the right
09-16-2009 11:43 PM
who can confirm me plz the rigth time-zone of France ?
09-17-2009 01:03 AM
23 in telephony-service.
Have you checked router have the right time in first place ?
09-17-2009 01:35 AM
23 that's the value i enter.
yes the router has the right time and ntp server configured too.
09-17-2009 01:47 AM
Which telephone do you have and which firmware ?
09-17-2009 01:49 AM
7942G, 7911G and 7961G
Firmware 8.4.2S
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide