09-16-2009 12:37 PM - edited 03-15-2019 07:46 PM
Hello,
I install a CME 7.0 change the time-zone in Telephony-service to 23 but still have the time of USA, can you tell me what's the can be the problem plz ?
Regards
09-16-2009 12:38 PM
Hase you got the right time in the router ?
Have you reset telephones ?
09-16-2009 12:42 PM
Yes, i get time-zon 23 (West Europe), i see that the time-zone is well configured on 23 with the show telephony-service command.
i reset phones too.
09-16-2009 12:47 PM
You need right time in the router, "show clock". Using an NYP server is the preferred form.
09-16-2009 12:50 PM
with "show clock" i have the correct time in the router, ntp server is configured too.
09-16-2009 01:01 PM
Hi,
If correct time is in the router and time-zone under telephony service, then you can try:
telephony-service
create cnf-files
Then reset the phones.
Hope it helps, if it does please rate.
Best regards,
- Adrián.
09-16-2009 01:04 PM
I tried that too but don't resolve the problem.
thanks for your help
09-16-2009 01:25 PM
do you have another idea plz to resolve this problem ?
09-16-2009 02:51 PM
Have you set right type under ephone ?
09-16-2009 11:36 PM
yes it's the right
09-16-2009 11:43 PM
who can confirm me plz the rigth time-zone of France ?
09-17-2009 01:03 AM
23 in telephony-service.
Have you checked router have the right time in first place ?
09-17-2009 01:35 AM
23 that's the value i enter.
yes the router has the right time and ntp server configured too.
09-17-2009 01:47 AM
Which telephone do you have and which firmware ?
09-17-2009 01:49 AM
7942G, 7911G and 7961G
Firmware 8.4.2S
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: