09-16-2009 11:20 PM - edited 03-04-2019 06:05 AM
I am trying to make logical Interfaces on my Cisco 2811 Ethernet WAN port,
I will use two internet connections on this port,, both connections will be terminating on a layer 2 switch, D-Link, and the switch will be connected to the Router,
Is it possible?????
The router asks me to first make this port for ISL or 802.1q....
09-17-2009 12:25 AM
Hello,
Yes it is possible to do this.
what i will suggest is that u can create a trunk between router and the the D-link switch. Please revert for any more clarification. Also put the logs in the next post, if u face any more issues
09-17-2009 01:32 AM
can you please give me any example,,,
09-17-2009 01:45 AM
You need a switch with 802.1q VLAN support, it's quite possible the one you have doesn't do that, so get a cisco a linksys switch.
09-17-2009 04:58 AM
ok.. lets assume that I have it... then....
should I configure it the same way we do Inter vlan Routing???
09-17-2009 05:07 AM
Yes.
Please remember to rate useful posts with the scrollbox below.
09-17-2009 07:46 AM
ok,, sure,, let me check it out first..:-)
09-18-2009 03:23 AM
Should I be able to configure Soft IPsec VPN on the router????
and the users will communicate with 2 live IPs,, I mean,, some users will use one , and the others will use the second one,,,
As well, I want to configure the site-to-Site VPN...
The main Objective is to use only one ethernet WAN Port...
09-18-2009 04:18 AM
You can do that.
If you have no experience in configuring routers, VPN etc, I recommend you hire a certified professional for safe results without business-affecting mistakes.
09-18-2009 04:50 AM
:-)
I am CCNA Certified,,
Actually due to short down time, I want to complete the documentation first.. and want to ensure that this will work,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide