Connecting a SPA8000 to a PBX

mariapenilla · ‎09-17-2009

Hi, I'm trying to coonect a SPA8000 to an Alcatel PBX, through the FXS ports, to get calls out of Skypem with the Skystone solution. The scheme is

Analog phone ---- PBX (FXO)---SPA8000-----Skysytone(SIP)----- SKYPE

We have been able to make calls from Skype to the PBX, but when we try to make a call from the PBX to Skype, we see in the Linksys syslog the line gets "Off Hook", but we don't receive the rest of the digits.

Any idea?

Patrick Born · ‎09-17-2009

Hi Maria,

My immediate thought was that the dial plan is an issue, but given that the device goes off hook, this does not appear to be the case.

Please provide:

the SPA8000's config: https://www.myciscocommunity.com/docs/DOC-10116
the syslog log - debug level 3: https://www.myciscocommunity.com/docs/DOC-5405
A description of what you dial and what occurs
A Wireshark trace so I can see what the SPA8000 is doing on the network

Regards,

Patrick

----------