×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Is WCCP Supported on WS-C3560G-24TS-E

Answered Question
Sep 17th, 2009
User Badges:

I have been searching around, I know it is part of the 12.2 Firmware and beyond, but not finding any specific information in regards to this.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Giuseppe Larosa Thu, 09/17/2009 - 09:19
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello,


it is supported see the config chapter for 12.2(44)SE


http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swwccp.html


you may need to check the following:


>>To use this feature, the switch must be running the IP services image (formerly known as the enhanced multilayer image [EMI]).


you need also to check the sdm you have


show sdm prefer


http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swsdm.html#wp1140657


Hope to help

Giuseppe


Actions

This Discussion