09-18-2009 01:46 AM - edited 03-06-2019 07:46 AM
Hi,
What IOS version do i need for using the Cisco Configuration Professional on a 1861? I want to use a gui for this device
09-18-2009 02:29 AM
You need Secure Device Management or SDM.
09-21-2009 11:19 PM
thanks, but please look at the following site: http://www.cisco.com/en/US/prod/collateral/routers/ps5853/ps8321/prod_qas0900aecd806c4def.html
The SDM is not supported for the 1861
09-21-2009 11:29 PM
David,
You are correct and CCP is supported on the 1861 router. It requires 124-11.XW6 or 12.4(20)T and later IOS versions.
http://www.cisco.com/en/US/prod/collateral/routers/ps9422/data_sheet_c78_462210.html
HTH,
Mark
09-21-2009 11:33 PM
Thanks Mark,
we've tried this with xw6 and 20t but the ccp gives a error message - something like "hardware platform not supported"
09-21-2009 11:35 PM
What version of CCP are you using? This guide references version 1.4.
Mark
09-21-2009 11:56 PM
1.4
09-22-2009 05:36 PM
There an issue on CCP 1.4 for vlan interfaces on 1861. This will be fixed in CCP 2.0, that one is coming out soon.
09-22-2009 11:35 PM
ok, thanks for the answer.
So, what is the workaround? Do i have to use a static ip?
09-23-2009 08:36 AM
Workaround is to use the CLI in the meantime.
2.0 should be released in a few weeks.
10-26-2009 06:18 AM
Hi,
so, after installing configuration professional 2.0 - same problem. "unsupported platform". we have "C1861W-SRST-B/K9" (note - with wlan). when i look at the supported hardware document - every device is supported but not the "C1861W-SRST-b/K9". Could it be, that this platform is totally not supported?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide