09-18-2009 06:50 AM
I'm having problem viewing CONFIG_CHANGE from RME Change Audit page. I'm seeing message DCMA0055:CM0036: The configuration file cannot be displayed as this could be a binary file.
Anyone knows how to view this? I have RME 4.1.1 installed on Windows.
Many thanks!
Solved! Go to Solution.
09-18-2009 08:01 AM
You are trying to view the VLAN configuration (i.e. vlan.dat) which is a binary data file. What you are seeing is expected. You cannot view the change details for the VLAN config. If you want to disable the change audit generation for these configs, go to RME > Admin > Change Audit > Config Change Filter, and check the "Enable vlan Change Audit Filter" box.
09-18-2009 08:01 AM
You are trying to view the VLAN configuration (i.e. vlan.dat) which is a binary data file. What you are seeing is expected. You cannot view the change details for the VLAN config. If you want to disable the change audit generation for these configs, go to RME > Admin > Change Audit > Config Change Filter, and check the "Enable vlan Change Audit Filter" box.
09-18-2009 09:46 AM
Thanks! I did what you said and now I'm able to see what I need.
05-13-2010 10:31 PM
Thank you, all work now.
11-23-2010 05:03 PM
i have the same problem and do as the
but i always have the problem viewing CONFIG_CHANGE from RME Change Audit page. I'm seeing message DCMA0055:CM0036: The configuration file cannot be displayed as this could be a binary file
what can i do to fix this ,I have RME 4.1.0 installed on Windows.
11-23-2010 10:00 PM
See my answer to this thread. You will never be able to view the VLAN config in RME as that is a binary file. However, you can disable the creation of ChangeAudit records whenever the VLAN config is archived.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide