Equivalent to "sh isdn ac" when using MGCP

Unanswered Question
Sep 20th, 2009
User Badges:
  • Blue, 1500 points or more

When a voice gateway is in MGCP mode, "sh isdn ac" doesn't work.


Is there a way to get similar information ?


The closest I've come up with is "sh voice port sum" (Which isn't great)


Thanks,


GTG

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Sun, 09/20/2009 - 03:00
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

With MGCP, call-control intelligence is taken away from the router, so its ability to tell you what's going on will become very limited.


So, either use H.323, or look into the CUCME for any kind of monitoring and statistics information.


Nicholas Matthews Sun, 09/20/2009 - 17:04
User Badges:
  • Red, 2250 points or more

'show call active voice brief' can be helpful, but when the ISDN b-channel is back-hauled to CUCM there is no way for the gateway to know the ISDN details. So the gateway will know which ports are in use, but no calling/called numbers.


-nick

Actions

This Discussion