09-21-2009 01:05 AM - edited 03-11-2019 09:17 AM
Hi, We have ASA 5505 running for our Production n/w and using 4 V-lans which are configured on ASA. Now we want 6 more v-lans to be added but we cant configure on ASA because of limited interfaces. As I know we cant make sub interfaces on ASA 5505 model, am i correct?
Secondly, we are going to buy a L3 Cisco Catalyst switch 3500 and will configure all V-Lans on Switch but I dont want to enable the IP routing on L3 as all V-lan communication I want to configure on ASA so what would be the scenario.
Pls. explain??
09-21-2009 02:17 AM
Ray
The 5505 will support trunking and up to 20 vlan interfaces but you will need to upgrade to the security plus license -
"Secondly, we are going to buy a L3 Cisco Catalyst switch 3500 and will configure all V-Lans on Switch but I dont want to enable the IP routing on L3 as all V-lan communication I want to configure on ASA so what would be the scenario."
Well you back to square one here. If you want to route all vlans off the ASA then you will need to upgrade to the security plus license and then connect the 3560 via a L2 trunk to the ASA.
Jon
09-21-2009 04:52 AM
Hi Jon,
Thank you for your reply.
We are using Security plus license on ASA 5505. Now what do we need?
09-21-2009 08:08 AM
Can anyone give an example to setup this scenario?
Pls. help!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide