Identify 6506 Supervisor Engine

Unanswered Question
Sep 21st, 2009

Hi,

We are trying to identify the supervisor engine provided by the vendor. I don't have physical access on the switch. They are claiming that they gave us sup720-3bxl but the show inventory and show module displays sup720-3b only.

------------------ show module ------------------

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

2 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC SAD044501D5

3 16 SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX SAL09222DJ4

5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1027U4Q5

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

2 0002.fc20.f7ac to 0002.fc20.f7b3 1.3 5.4(2) 8.3(0.156)RO Ok

3 0014.1cd8.a9c0 to 0014.1cd8.a9cf 2.6 6.3(1) 8.3(0.156)RO Ok

5 0014.a982.339c to 0014.a982.339f 5.2 8.5(3) 12.2(18)SXD7 Ok

Mod Sub-Module Model Serial Hw Status

--- --------------------------- ------------------ ------------ ------- -------

5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD111404WC 1.8 Ok

5 MSFC3 Daughterboard WS-SUP720 SAL1027U7KF 2.5 Ok

------------------ show inventory ------------------

NAME: "WS-C6506", DESCR: "Cisco Systems Catalyst 6500 6-slot Chassis System"

PID: WS-C6506 , VID: , SN: TBA04171663

NAME: "WS-C6000-VTT 1", DESCR: "VTT FRU 1"

PID: WS-C6000-VTT , VID: , SN: SMT04175688

NAME: "WS-C6000-VTT 2", DESCR: "VTT FRU 2"

PID: WS-C6000-VTT , VID: , SN: SMT04171608

NAME: "WS-C6000-VTT 3", DESCR: "VTT FRU 3"

PID: WS-C6000-VTT , VID: , SN: SMT04171143

NAME: "WS-C6000-CL 1", DESCR: "C6K Clock FRU 1"

PID: WS-C6000-CL , VID: , SN: SMT03473817

NAME: "WS-C6000-CL 2", DESCR: "C6K Clock FRU 2"

PID: WS-C6000-CL , VID: , SN: SMT03473687

NAME: "2", DESCR: "WS-X6408A-GBIC 8 port 1000mb GBIC Enhanced QoS Rev. 1.3"

PID: WS-X6408A-GBIC , VID: , SN: SAD044501D5

NAME: "Gi2/1", DESCR: "1000BaseLH"

PID: JGBR12LY02332 , VID: , SN: JUT08520CD9

NAME: "Gi2/2", DESCR: "1000BaseLH"

PID: JGBR12LY02332 , VID: , SN: JUT08520CDE

NAME: "3", DESCR: "WS-X6516-GE-TX SFM-capable 16 port 10/100/1000mb RJ45 Rev. 2.6"

PID: WS-X6516-GE-TX , VID: , SN: SAL09222DJ4

NAME: "5", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 5.2"

PID: WS-SUP720-3B , VID: V02, SN: SAL1027U4Q5

NAME: "msfc sub-module of 5", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.5"

PID: WS-SUP720 , VID: , SN: SAL1027U7KF

NAME: "Gi5/1", DESCR: "1000BaseLH"

PID: FTLF1318P2BCL-CS , VID: , SN: FNS11171EKP

NAME: "Gi5/2", DESCR: "1000BaseLH"

PID: FTRJ1319P1BTL-C7 , VID: , SN: FNS1022JQ6E

NAME: "switching engine sub-module of 5", DESCR: "WS-F6K-PFC3BXL Policy Feature Card 3 Rev. 1.8"

PID: WS-F6K-PFC3BXL , VID: , SN: SAD111404WC

NAME: "PS 1 WS-CAC-2500W", DESCR: "110/220v AC power supply, 2500 watt 1"

PID: WS-CAC-2500W , VID: , SN: ART0639007U

NAME: "PS 2 WS-CAC-2500W", DESCR: "110/220v AC power supply, 2500 watt 2"

PID: WS-CAC-2500W , VID: V01, SN: ART0913E0GM

Is it a sup720-3b or sup720-3bxl?

Thanks in advance

John

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rducombl Mon, 09/21/2009 - 06:41

Hi john,

It is a PFC3b-xl you can see in sh inventory there is :

NAME: "switching engine sub-module of 5", DESCR: "WS-F6K-PFC3BXL Policy Feature Card 3 Rev. 1.8"

PID: WS-F6K-PFC3BXL , VID: , SN: SAD111404WC

You can as well verify runtime operation of the pfc using :

sh platform hardw pfc mode

Roland

YANGCCIE4 Mon, 09/21/2009 - 07:47

NAME: "switching engine sub-module of 5", DESCR: "WS-F6K-PFC3BXL Policy Feature Card 3 Rev. 1.8"

PID: WS-F6K-PFC3BXL , VID: , SN: SAD111404WC

hi, WS-F6K-PFC3BXL i saw it in your output.

hope it help

Yang

John Patrick Lopez Mon, 09/21/2009 - 11:30

So only the PFC is the difference. If I have a Sup720 hardware and I installed PFC3BXL then it can be considered as Sup720-3bxl?

Actions

This Discussion