09-21-2009 10:18 AM - edited 03-15-2019 07:49 PM
Hi All,
I need to setup system distribution list in CUX. in CUCM, I need to forward all call from that number to voicemail. it seems there are two choices to accomplish this task:
1- create DN in CUCM and forward all to voicemail
2- create CTI route point with that numbe and forward all to the voicemail.
technically, which way is better choice? and what is the difference between two method?
any suggestion would be very appreciated.
thanks
Alex
Solved! Go to Solution.
09-21-2009 10:24 AM
Hi Alex,
The recommended method would be Number 2 -
2- create CTI route point with that numbe and forward all to the voicemail.
This is a "virtual" setup that does not require any further config or Phone association :)
Cheers!
Rob
09-21-2009 10:24 AM
Hi Alex,
The recommended method would be Number 2 -
2- create CTI route point with that numbe and forward all to the voicemail.
This is a "virtual" setup that does not require any further config or Phone association :)
Cheers!
Rob
09-21-2009 11:45 AM
Hi Rob,
I've configured the system with CTI and DN forward all to voicemail. But when I dial that number from IP phone, it plays default unity connection AA, and doesn't play spoken name of system distribution list. any suggestion?
appreciate
Alex
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: