WLC not recognized in Campus Manager Topology Map

Answered Question
Sep 21st, 2009
User Badges:

Hi Experts,


WLC (4400 series) is not recognized in Campus Manager 5.1.3 Topology Map despite the device state under CM is Managed.


Please advise!!


Thanks!

Correct Answer by Joe Clarke about 7 years 10 months ago

Make sure you have SNMPv1 enabled on the WLC. This is not enabled by default.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Mon, 09/21/2009 - 19:49
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

What does it appear as on the topology map? What is its sysObjectID?

jeeyishyuan Mon, 09/21/2009 - 19:53
User Badges:

Hi Joe,


It appears as a red box with question mark on the topology. The sys OID is 1.3.6.1.4.1.14179.1.1.4.3

Correct Answer
Joe Clarke Mon, 09/21/2009 - 20:13
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Make sure you have SNMPv1 enabled on the WLC. This is not enabled by default.

jeeyishyuan Mon, 09/21/2009 - 20:16
User Badges:

But I am using SNMPv2c now...Why SNMPv1 must be enabled?


Joe Clarke Mon, 09/21/2009 - 20:27
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The version of Campus you have requires it.

Actions

This Discussion